Renkforce Pro 10+ Bedienungsanleitung Seite 55

12.6 Replacing filaments
If you want to use a different filament, you must first unload the current filament and then load the new filament.
Open the menu Tools.
Touch the button Stop as soon as
the current filament has been completely
retracted from the feeder.
Cut the new filament at an angle and feed
it into the feeder.
Open the menu Filament.
Touch the button E1 Load to load the
filament into the extruder.
Touch the temperature display to preheat
the extruder.
Touch the button Stop as soon as molten filament flows from the nozzle.
Touch the button E1 Unload to unload
the curent filament.
55