Introduction; Intended Use; Delivery Content; Up-To-Date Operating Instructions - Renkforce Cube One Bedienungsanleitung

2 Introduction

Dear customer,
Thank you for purchasing this product.
If there are any technical questions, please contact:

3 Intended use

The product is an entry-level 3D printer. Use the product to print 3D models with the help of the accompanying mobile
app or a connected computer. The product is intended for private use only.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all
circumstances.
If you use the product for purposes other than those described, the product may be damaged. Improper use can result
in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements. For safety and approval purposes, you
must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties
only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

4 Delivery content

3D printer
Power adaptor
Spool holder

5 Up-to-date operating instructions

Download the latest operating instructions at
shown. Follow the instructions on the website.
22
www.conrad.com/contact
USB cable
PLA filament (5 m)
Levelling paper
www.conrad.com/downloads
Hex key 2 mm
Operating instructions
or scan the QR code