Renkforce Pro 10+ Bedienungsanleitung Seite 49

11.1.2 Calibrating the Z-offset
By calibrating the Z-offset you set the distance between the nozzle and the print bed.
Z-offset calibration is followed by "Auto-levelling".
Insert the print bed and magnetic mat.
Wait until the preheat temperature has been reached.
CAUTION
Hot print bed
Touching hot print bed can cause burns
Let cool down before touching
Open the menu Tools.
Open the menu Manual.
Touch the button Preheating to start the
preheating process.
Touch to move the extruder to its zero
position.
49