Renkforce Pro 10+ Bedienungsanleitung Seite 67

21 Technical data
21.1 Power supply
Input voltage ................................. 100 – 240 V/AC, 50 – 60 Hz
Power consumption ...................... 600 W
Fuse .............................................. F10AL, 250 V
21.2 Printing
Supported file format .................... AMF / STL / OBJ / gcode
Printing technology ....................... FDM
Build volume ................................. 360 x 360 x 400 mm
Supported filament diameter Ø ..... 1.75 mm
Supported filament type ................ PLA, PLA Compound, PETG, ABS, ASA, PC, PP,
PA, TPU 95A, TPU 87A, TPE 83A, Carbon fiber,
PEEK, PEI
Nozzle diameter ............................ 0.4 mm
Print layer thickness ..................... min. 0.05 mm / max. 0.3 mm
Extruder temperature .................... max. 260 °C
Print bed temperature ................... max. 120 °C
Print speed ................................... 20 – 120 mm/s
Building accuracy ......................... +/-100 μm
21.3 Software
Software compatibility ................... Windows
Supported slicing software ........... Ultimaker Cura, Slic3r
7 and higher
®
21.4 Wi-Fi module
Wi-Fi frequency range .................. 2412 - 2472 MHz (802.11b/g/n20)
Wi-Fi transmission power ............. 802.11b : 10.91 dBm
802.11g : 11.98 dBm
802.11n-HT20: 13.04 dBm
Transmission distance .................. 50 m
21.5 Environment
Operating conditions ..................... 0 to +40 °C,
30 - 90% relative humidity (non-condensing)
Storage conditions ........................ 0 to +40 °C,
30 - 90% relative humidity (non-condensing)
21.6 Others
Dimension without spool ............... 560 x 560 x 760 mm
Weight .......................................... 57 kg
67