Function And Features; Mounting And Electrical Connection; Operating And Indicating Elements - IFM Electronic ecomot200 DI6001 Montageanleitung

COMPACT SPEED MONITOR

1. Function and features

The unit detects without contact if a set rotational speed is exceeded or not rea-
ched and signals this by means of a switched output. The pulse output enables the
external evaluation of the damping pulses.
Nominal sensing range (S

2. Mounting and electrical connection

Fix the unit by means of a mounting fixture and protect it against loosening by
means of the enclosed nuts. Not flush mountable.
Adhere to the above dimensions to ensure a correct function.
The unit must only be connected by a qualified electrician. Observe the na-
tional and international regulations for the installation of electrical equip-
ment. For the wiring please see the type label.

3. Operating and indicating elements

Set button
Press the button with a blunt object (e.g. pen).
4
All manuals and user guides at all-guides.com
M18
) and operating voltage see type label.
n
LED
PWR green
OUT yellow
DMP green
OUT + yellow
DMP green
2: pulse output
(pulse sequence corresponds
to the damping frequency)
4: switching output
(adjustable)
Status Meaning
ON operating voltage ok
ON output is switched
pulse damping pulse
1 Hz time periods during
2 Hz the setting operation
double flash (see 5, setting operation)
flashing settings locked or setting
alternately not accepted