Panasonic EYFMH1WC Bedienungsanleitung Seite 93

3.4 PRECAUTIONS FOR WIRELESS COMMUNICATION
Cautions for using a WLAN device
The device uses a frequency band shared with other types of equipment including
industrial, scientific, and medical devices (e.g., a microwave) and radio stations such
as a premises radio station (licenced) and low-power radio station (unlicenced) for
mobile identification used in factory manufacturing lines and an amateur radio station
(licenced).
1. Before using the device, confirm that there is no premises or low-power radio station
for mobile identification or no amateur radio station operating in the vicinity.
2. If the device causes harmful interference with a premises radio station for mobile
identification, stop use of the band immediately and consult the support centre below
for the solution of the interference problem (e.g., installing a partition).
3. If the device causes harmful interference with a premises or low-power radio station
for mobile identification or an amateur radio station or such other problems, consult
the support centre.
█ There may be noise, shorter radio coverage, or malfunction occurring in
the following environmental conditions.
• There is an obstruction (e.g., a metal or reinforced concrete object) that prevents smooth radio
propagation between the wireless-enabled tool unit and the controller.
• The antennas of the controller are covered with metal.
• An operator's body is interfering with radio propagation between an operator (the wireless-enabled
tool unit) and the controller.
• There is a microwave, PC, or any other device causing noise in the vicinity.
• A cell-phone or PHS phone is used near the wireless-enabled tool unit and the controller.
EN
- 93 -