Panasonic EYFMH1WC Bedienungsanleitung Seite 78

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.13 HISTORY LOG ITEM LIST
Count
[Display overview]
A number counts up in the order that work was done. The count will be reset when you
import history logs from the tool to the Tool Manager software and delete the history
logs from the memory of the tool.
Date
[Display overview]
This shows the date when work was done.
Time
[Display overview]
This shows the time when work was done.
Work Result
[Display overview]
The result of work is judged OK or NOK. The OK/NOK judgment criteria are as follows.
OK: A shut-off stop made successfully without any error, NOK: A shut-off stop
incomplete, or made with an error
NOK Message
[Display overview]
When the work result is NOK, the reason for NOK is displayed in the Torque, Angle, or
Error category.
If the reason for NOK is classified as Error, the details will be displayed in the error
message on the last line of the history log.
Shut-off Torque
[Display overview]
This shows the configured parameter of torque that makes the tool shut off.
Upper Torque Limit
[Display overview]
This shows the configured parameter of the upper limit of torque for judging the work
result OK.
Lower Torque Limit
[Display overview]
This shows the configured parameter of the lower limit of torque for judging the work
result OK.
- 78 -
EN