Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.2 USING THE TOOL MANAGER SOFTWARE
2.2.3 REPAIRING THE TOOL MANAGER SOFTWARE
You can repair the Tool Manager software via its installer.
Try this if the Tool Manager software will not start.
1
On your PC or tablet with the Tool Manager software installed,
start the installer of the Tool Manager software as described in
2.2.1.
2
When the screen to repair or remove Tool Manager is displayed,
select " Repair Tool Manager_EYFSW102 " (①) and click [Finish]
(②).
3
Repair of the Tool Manager software starts.
When the notification that the repair has been successfully completed is displayed,
select [Close] (③).
●
①
EN
②
●
- 28 -
③
●
Werbung
