Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.2 USING THE TOOL MANAGER SOFTWARE
2.2.5 CONNECTING/DISCONNECTING THE TOOL
Connect the Tool
1
If power to the tool is not on, pull the trigger switch of the tool to
turn on the power.
2
Connect the tool to your PC or tablet with a USB cable.
CAUTION
• Hold the plug and insert or remove it straight. If you insert it diagonally, the
connector will be deformed and cause a malfunction.
• If performing above steps
3
When the pairing dialog is displayed, select [Pair Tool].
Note
• If there is no serial number information in the tool, select a tool's model number and
enter the serial number from the pairing dialog.
(The serial number is printed on the tool's color plate.)
※ Depending on the OS, it may be displayed
differently.
EN
1
2
to
in this order, you may fail in the connection.
※ Depending on the OS, it may be displayed differently.
- 31 -
Color plate
Continued to the next page
Werbung
