Panasonic EYFMH1WC Bedienungsanleitung Seite 87

3.1 CAPACITY AND SPECIFICATIONS OF THE TOOL
Specifications of the Tool
Model No.
Wrench size
Motor voltage
No-load speed
Number of pulses
Overall length
Overall height
Dimensions
Overall width
Mass (Weight)
Wireless Communication
Standard
Frequency band
Transmit power
Number of channels
USB connector
specifications
Number of tool history logs
that can be saved (in [Stand
Alone Mode])
Number of tool parameters
that can be held (in [Stand
Alone Mode])
Charging time (when
EY0L82B battery charger
used)
※1 The transmit power has been measured by a third-party organization.
※2 USB Type-C is a trademark of USB Implementers Forum.
EN
EYFMH1WC EYFMH1WP
0 to about 2300 rotations/minute
(The maximum speed can be set from about 1500 to 2300 rotations/minute.)
0 to about 2700 rotations/minute
EYFB41 used: About 246 mm
EYFB43 used: About 264 mm
(Maximum battery pack width: About 75 mm)
EYFB43 used: About 2.05 kg
Wireless LAN (IEEE802.11a/b/g/n)
2.412-2.472 GHz / 5.180-5.240 GHz
※1
2.4 GHz: 13.0 mW / 5 GHz: 9.2 mW
2.4 GHz: 1 to 13 channels / 5 GHz: 36, 40, 44, 48 channels
About 45000 bolts (at 1.2 s work)
EYFB41; Charging for practical use: 35 minutes, Full charging: 40 minutes
EYFB43; Charging for practical use: 45 minutes, Full charging: 60 minutes
- 87 -
EYFMH2WC
□12.7 mm
14.4 V DC
0 to about 2600 rotations/minute
About 215 mm
About 61 mm
EYFB41 used: About 1.8 kg
n: HT20 only
※2
USB Type-C™
1 parameter
EYFMH2WP