Panasonic EYFMH1WC Bedienungsanleitung Seite 72

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.12 DISPLAYING AND SAVING THE HISTORY LOG
Browse the History Logs Saved in the Tool Manager software
• The history logs saved in the Tool Manager software are displayed on the history list (①).
When you select a desired history log, the contents of that will be displayed on the history
display screen (②) in the right.
• To browse the history log acquired in offset setting, select [Offset] (③) from the history list.
(For how to set offsets,
• For the items of [Work Result], [Torque Result], [Angle (Before Snug)], and [Angle (After
Snug)], the display will be highlighted in green when there is no problem, or in red if there
is any problem.
● ③
● ①
Make a Supplementary Comment on the History Log File
You can make a supplementary comment on the history log file by performing the following
procedure.
1 Select a desired history log file (①), and click [Comment] (②).
① ●
2 When the comment field (③) becomes active, enter a desired
comment and press the Enter key.
The supplementary comment can be up to 25 one-byte characters or 15 two-byte
characters long.
EN
.)
Refer to 2.2.8
② ●
③ ●
- 72 -
② ●