Panasonic EYFMH1WC Bedienungsanleitung Seite 41

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.8 CONFIGURING PARAMETERS OF THE TOOL
Various parameters of the tool can be set from the Tool Manager software.
(2) Select a Parameter File to Edit
The parameter file can be selected in one of the following four ways.
█ Selecting the parameter file registered in the tool
1 From the tool list (①), select a connected tool for which you edit
configured parameters.
2 Select Parameter on the display change tab (②), and click [Read
From Connected Tool] (③).
● ①
█ Selecting the parameter file saved in the Tool Manager software
(
Refer to (8) in this section
Select Parameter on the display change tab (①), and click a desired parameter file (②).
EN
● ②
③ ●
for how to save the parameter file.)
① ●
② ●
- 41 -
Continued to the next page