Panasonic EYFMH1WC Bedienungsanleitung Seite 20

2.1 BASIC OPERATION
2.1.3 HOW TO USE
2 See the tightening confirmation lamp display to check whether
torque control has functioned.
For the tightening confirmation lamp display,
Note
• At reverse work, the tightening
confirmation lamps do not light up.
• The lamps will go out when you
pull the trigger switch.
To use the tool in a holder, select such a holder as will not
interfere with the trigger switch of the tool. If the holder
interferes with the trigger switch, the trigger switch will be
pulled in to make the battery pack discharge electricity,
causing a failure in the battery pack.
EN
Refer to 2.1.4
- 20 -
.
Tightening
confirmation
lamp