Rear Panel - Yamaha R100 Bedienungsanleitung

REAR PANEL |
YAMAHA
MODEL Ri
FOOT SW YAMAHA CORPORATION
YPASS MADE IN JAPAN
9 Input $ Output Jacks
The output from your instrument or other source plugs
into the INPUT jack, while the stereo OUTPUT jacks
deliver the R100's output to a sound system or record-
ing equipment.
@ FOOT SW BYPASS Jack
"Ай optional Yamaha FCS footswitch сап be used for
foot control of the R100's bypass ON/OFF function.
See "BYPASSING THE EFFECT" on page 6.
THIS MODEL 18 PROHIBITED FOR CASCADE POWER
SUPPLY CONNECTION FROM OTHER EQUIPMENTS.
ЖИВО КНС
REVERB PROCESSOR ES RÉUNIE лоста,
INPUT
DC12V IN
*-9-
O MIDI IN Connector
MIDI program change messages received at the MIDI
IN connector can select any of the R100's effect pro-
grams. See "6. MIDI CONTROL" on page 15.
O DCI2V IN Jack
The DC output cable of the PA-1C (or PA-1) AC
Adaptor supplied with the R100 should be connected
here. The AC Adaptor should be plug ged into a con-
venient AC mains outlet.
CAUTION?!
Do not use an AC adaptor with this unit other than
"ће one PA-1C (or PA-1) which is supplied with it.
Also, never use a cascade arrangement for the power
supply connection from other equipment. '