Stereo Echo Programs; Delay L, К Programs; Parameter Chart - Yamaha R100 Bedienungsanleitung

STEREO ECHO PROGRAMS
DELAY L,R PROGRAMS
he programs in the STEREO ECHO group use multiple echoes independently programmed for the left and right
channels. This creates a range of fascinating effects — from straightforward echo to chorus and filter sounds. The
DELAY L/R programs provide : a number of sophisticated multiple delay sounds, with independent left and right channel
delay settings.
PARAMETER 1: Effect/Direct Signal Balance
e Range: 0 — 99 |
Adjusts Ше balance between the direct sound of your instru-
ment (or other source) and the effect signal. At "99" only the
effect sound is delivered from the R100 outputs, while at "0"
only the direct sound is output. At a setting of "50," the
direct and effect sounds are output in approximately equal
proportions.
PARAMETER 2: Left Channel Delay
e Display Range: 0 — 99
» Corresponding Delay Range:
0.1 — 250 milliseconds in the STEREO ECHO | programs
0.1 — 500 milliseconds in the DELAY L, R programs
Sets the time between the repeats heard from the left channel.
PARAMETER CHART
Reverb Time 0.3 ~ 99.0 sec
• REVERB PROGRAMS + DELAY & REVERB PROGRAMS
e DELAY + REVERB PROGRAMS
——» REVERB TIME (sec)
"0 10 20 30 40 50 60 70 80 90 99
——» LED DISPLAY VALUE
PARAMETER 3: Right Channel 1 Delay
e Display Range: 0 — 99
e Corresponding Delay Range:
0.1 — 250 milliseconds in the STEREO ECHO programs
0.1 — 500 milliseconds in the DELAY L, R programs
Sets the time between the repeats heard from. the right chan-
nel, Жон боо
PARAMETER 4: Feedback Gain
e Range: 0 — 99 | | |
Sets the amount of the delay signal fed back to the input of
the processor. The higher the feedback gain setting, the
greater the number of delayed repeats produced.
ооо EEE
ЕЕ ПЕЕ
Ess:
0880599009005
0200009 DESIRED
Шеорвеаророрвоврвевобоо
EE
Галаа гаа vis
salir isl a [so s ao ја
505606570 7580 as, o 35
11