Scheppach WSE1100 Original Bedienungsanleitung Seite 30

Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE).
This product must be disposed of at a designated col-
lection point. This can occur, for example, by handing
it in at an authorised collecting point for the recycling
of waste electrical and electronic equipment. Improp-
er handling of waste equipment may have negative
consequences for the environment and human health
due to potentially hazardous substances that are often
contained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the effective use of natural resources. You
can obtain information on collection points for waste
equipment from your municipal administration, public
waste disposal authority, an authorised body for the
disposal of waste electrical and electronic equipment
or your waste disposal company.
15. Troubleshooting
The table below contains a list of error symptoms and explains what you can do to solve the problem if your tool
fails to work properly. If the problem persists after working through the list, please contact your nearest service
workshop.
Malfunction Possible cause
No mains voltage
The machine will
The main fuse has tripped
not switch on
On / off switch defective
Motor defective
Earth clamp not connected to the
device /
No ignition spark Earth clamp not fitted on the
workpiece
30 | GB
Remedy
Check the socket, mains cable, cable, mains plug;
have these repaired by a qualified electrician if nec-
essary.
Check the main fuse
Repair by customer service department
Repair by customer service department
Connect the earth clamp to the welding machine /
Fit the earth clamp on the workpiece
www.scheppach.com