Spencer S-MAX PRO Gebrauchsanweisung Seite 18

The base or other elements of the fastener
are damaged
The release lever does not show any
resistance to the translation and doesn't
return in its original place
Is not possible to fix the stretcher on the
fastener
The Stretcher and the hook assembled
together do not seem to be stable
13. ACCESSORIES
There are no accessories for this device.
14. SPARE PARTS
IT
EN
DE
FR
ES
PT
RIST058 CENTRAL PROFILE
RIST059
RELEASE CONTROL ROD
RIST060 COMPLETE REAR LOCKING SYSTEM
15. DISPOSAL
When the device is no longer suitable for use, if they haven't been contaminated by any particular agents, they can be disposed of as normal solid waste. Otherwise follow the
current regulations for demolition.
The information contained in this document could be modified without any warning and is not to be intended as a commitment on behalf of Spencer Italia S.r.l. Spencer products
are exported to many countries and the same identical regulations are not always valid. For this reason there could be differences between the description here described and
the product actually delivered. Spencer continually strives to reach the perfection of all items sold. We therefore hope you will understand if we reserve the right, at any time, to
All rights reserved. No part of this document can be photocopied, reproduced or translated into another language without the written approval of Spencer Italia S.r.l.
18
The components were damaged during
installation
The tear and wear caused by use have caused
damage to parts
The spring inside the locking system is damaged
The release lever is damaged
The stretcher being used is not suitable for the
fastener
The stretcher has not been correctly inserted into
the fixing system
The fixing screws are loosened or the contact
surfaces are deteriorated and generate looseness
RIST060
RIST058
Warning
modify the shape, equipment, lay-out or technical aspects that are herein described.
© Copyright Spencer Italia S.r.l.
Put the device immediately out of service and contact the service
center
Put the device immediately out of service and contact the service
center
Contact the manufacturer or the service center to check the
compatibility of the device
Check the correct insertion of the stretcher. For a correct mounting,
the stretcher must be perfectly aligned with the fastener
Put the device immediately out of service and contact the service
center
RIST156
RIST059
RIST108 UNLOCKING LEVER EXTENTION KIT
RIST156
FRONT COMPLETE LOCK FOR S-MAX PRO
RIST108