Parkside PASA 20-Li A1 Installationsanleitung Seite 26

GB MT
b) Cutting injuries
c) Hearing damage if suitable ear protec-
tion is not worn.
d) Health injuries which result from hand/
arm vibration, in the event that the devi-
ce is used over a longer period of time
or is not used and maintained properly.
Warning! During operation, this
power tool produces an electroma-
gnetic field. Under certain circum-
stances, this field may negatively
affect active or passive medical
implants. In order to reduce the
danger of serious or fatal injuries,
we recommend that individuals
who wear medical implants should
consult their doctor and the manu-
facturer of the implant before opera-
ting the device.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the PARKSIDE
X 20 V Team series.
A detailed description
of the charging process
and further information
can be found in the
separate operating
instructions.
Assembly instructions
Only insert the rechargeable
battery once the device is com-
pletely assembled. If the devi-
ce is switched on accidentally,
there is a danger of injury.
26
Wear protective gloves when hand-
ling the saw blade in order to avoid
cutting yourself.
Installing/removing
the saw blade
Caution! Risk of injury!
- Do not use any blunt or bent
blades or blades which are
damaged in any other way.
- Only use saw blades with the
same saw blade shank as the
saw blade provided.
Wear protective gloves when
handling the saw blade in order
to avoid cutting yourself.
You will find the spare saw blades
in "Spare Parts/Accessories".
Mounting the saw blade:
1. Turn the quick-change chuck (3) in the
direction of the arrow
the shank of the saw blade (1) all the
way into the slot of the saw blade hol-
der (13).
The teeth of the saw blade must point
downwards.
2. To unlock, release the quick-change
chuck (3) so that it snaps back into the
initial position.
3. Check that the saw blade is secure by
pulling on it.
Removing the saw blade:
4. Turn the quick-change chuck (3) in the
direction of the arrow
saw blade (1) out of the saw blade hol-
der (13).
and insert
and pull the