Parkside PASA 20-Li A1 Installationsanleitung Seite 22

GB MT
Symbols on the device
Attention!
Read the instruction manual
Do not expose the device to
moisture. Never operate the
device in rain.
Electrical devices must not be
disposed of with domestic waste.
This device is part of the
PARKSIDE X 20 V TEAM
series
General Safety Directions
for Power Tools
WARnInG! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and
instructions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETy
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
22
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETy
a) Power tool plugs must match the
outlet. never modify the plug in
any way. Do not use any adap-
ter plugs with earthed (groun-
ded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water ent-
ering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operation of the power tool
in a damp environment is un-
avoidable, please use a residual
current circuitry. The use of a resi-
dual current circuitry reduces the risk of
an electric shock.