Parkside PASA 20-Li A1 Installationsanleitung Seite 25

also cause a charge in metal parts of the
appliance and result in an electric shock.
• Fasten and secure the workpiece
by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your
own body, it will stay instable and this
can lead to a loss of control.
• Keep hands away from the
sawing area. Do not reach un-
derneath the workpiece. Upon
contact with the saw blade there is a
risk of injury.
• Check the material to be proces-
sed for foreign bodies, such as
nails, screws etc. which must be
removed.
• Move the power tool against the
workpiece only when it is tur-
ned on. There is a risk of kickback if
the tool insert jams in the workpiece.
• Make sure that the footplate
or branch support is securely
placed against the workpiece
during sawing. The saw blade can
tilt and lead to loss of control over the
power tool.
• After you have finished work,
turn the power tool off and do
not pull the saw blade out of
the cut until it has come to a
standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw bla-
des in perfect condition. Bent or bl-
unt blades can break, adversely affect
the cut or cause kickback.
• Do not brake the saw blade af-
ter switching the device off by
applying side pressure. The saw
blade may be damaged, break or cau-
se a kickback.
• Tighten the material firmly. Do not
support the workpiece by hand
or foot. Do not touch any objects
or the ground with the saw run-
ning. There is a risk of kickback.
• Use suitable detectors in order to
find hidden supply lines or ask
the local utility company. Contact
with electrical cables can lead to elec-
tric shock and fire. Contact with a gas
line can result in an explosion. Damage
to a water pipe can lead to property
damage and electric shock.
• Hold the power tool tightly while
working and ensure a secure
footing.
• Wait until the power tool has
stopped before placing it down.
The tool insert can tilt and lead to loss of
control over the power tool.
• Switch the appliance off imme-
diately if the saw blade jams.
Force apart the saw cut and pull
the blade out carefully. This can
lead to loss of control over the power
tool.
• Do not saw any materials (e.g.
lead-based paints and coatings
or materials containing asbestos)
whose dust can be harmful.
•
Do not use any accessories
that are not recommended by
PARKSIDE.
This can result in electric shock or fire.
Residual risks
There will always be residual risks even if
you operate this electrical tool according to
the instructions. The following hazards may
occur in connection with the type and de-
sign of this electric tool:
a) Lung damage if suitable respiratory
protection is not worn.
GB MT
25