Performance Data - BWT STANDARD Installations- Und Anwendungshandbuch

The warranty does not cover:
• replaceable elements (cartridges, reverse osmosis membrane, carbon post-filter, mineralizing
post-filter or other consumables included in the package);
• electrical equipment in ungrounded electrical systems or lack of voltage regulator where it is
required;
• components that require replacement because of normal wear and tear;
• faults and problems that have arisen due to untimely replacement of consumable elements
where there intervals are provided in this manual, and also due to use of other manufacturers'
consumables.
All claims related to taste, smell, and other quality indicators of water purified by this system
should only be filed with a water test report issued by an accredited laboratory.
Cases not covered under this warranty shall be resolved in accordance with local legislation.

14. PERFORMANCE DATA

This system has been tested according to NSF/ANSI 58 for reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a con-
centration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI 58.
Substance
Arsenic (pentavalent)
*
Barium
*
Cadmium
*
Chromium (hexavalent)
*
Chromium (trivalent)
*
Chromium
(hexavalent and trivalent)
*
Copper
*
Fluoride
*
Lead
*
Mercury
*
Perchlorate
*
Radium 226/228
*
Selenium
*
Total dissolved solids
Turbidity
*
* Only systems with membrane TW30-1812-75 are certified to these reduction claims.
Code P0090636 - Rev 0 - 19/06/2019
Influent challenge concentration (mg/L)
0.30 ±10%
10.0 ±10%
0.03 ±10%
0.3 ±10%
0.3 ±10%
0.3 ±10%
3.0 ±10%
8.0 ±10%
0.15 ±10%
0.006 ±10%
0.10 ±10%
25 pCi/L ±10%
0.10 ±10%
750 ±40% mg/L
11 ±1% NTU
Maximum permissible product water
concentration mg/L
0.010
2.0
0.005
0.1
0.1
0.05 (hexavalent) and
0.05 (trivalent)
1.3
1.5
0.010
0.002
0.006
5 pCi/L
0.05
187
0.5 NTU
61