BWT STANDARD Installations- Und Anwendungshandbuch Seite 33

2. SPECIFICATIONS AND COMPONENTS
2.4. REVERSE OSMOSIS SYSTEM COMPONENTS
2) Pressure tank
5) Feed valve
PP5 GAC PP1
CPV25105 CHV2510 CPV25101
10) Sump and membrane
housing wrenches
13) Locking clip:
accessory securing push-fit connections from inadvertent disconnection in easily
accessible locations. Presence of the clip has no effect on tightness of the connection. Quantity of clips in your
reverse osmosis filter may vary depending on design of the product, and has no bearing on its performance.
* Can be included into filter assembly of some models.
Code P0090636 - Rev 0 - 19/06/2019
3) Drinkingwater faucet
6) Tank valve
9) Set of pre-filter cartridges (may vary with model)
9.1
PP5 GAC
CPV25105 CHV2510
11) Reverse osmosis
membrane
4) Feed water adapter
4.1)* Сonnection kit for 3/8" threaded water supply
a) Adapters
7) Set of colored tubes
9.2
PP5
CTO
CHVCB2510 CPV25105
b) 3/8" feed water
adapter
or
8) Drain saddle
9.3
CTO PP1
CHVCB2510 CPV25101
12) Flow restrictor
33