BWT STANDARD Installations- Und Anwendungshandbuch Seite 53

7. SANITIZATION OF REVERSE OSMOSIS FILTER
4.
5.
Put a chlorine tablet in the 1
Fill the sump with water and screw on.
6.
After 15 minutes, open the drinking water faucet
7.
When water running from the faucet
8. Leave the system for 2-3 hours.
9.
Open faucet 3 and feed valve
10.
Install all consumable parts back into the system. Open tank valve
11. Drain the tank and re-fill for at least two times (until chlorine odor cannot be smelt).
Code P0090636 - Rev 0 - 19/06/2019
st sump.
3
and feed valve
3
starts to smell like chlorine, close both the faucet
5
and let water run until bleach odor is gone.
5
.
3
and feed valve
6 5
and feed valve .
5
.
53