Stihl RMI 422.1 Gebrauchsanleitung Seite 141

The selected active time for
automatic mowing can be disabled
or enabled using Active time off
and Active time on respectively.
The time window can be changed
with Change active time.
If the selected active time is no
longer required, the menu item
Delete active time should be
selected.
If the time windows for the
necessary mowing and charging
operations are not sufficient, active
times must be extended or added,
or the mowing duration must be
reduced. A corresponding display
message appears.
New mowing plan
The command New mowing plan
deletes all stored active times. The
step "Program the robotic mower" of
the installation assistant is called up.
( 9.13)
If completion of the reprogramming
occurs during an active time, the
robotic mower begins an automatic
mowing operation after the
individual daily plans have been
confirmed.
0478 131 9957 A - EN
11.8 More
1. Lock iMOW®:
Activates the disabling device.
Press the illustrated button combination to
unlock. ( 5.2)
2. Edge mowing:
Following activation, the robotic mower
mows the edge of the mowing area. After
completing one circuit, it travels back to
the docking station and charges the
battery.
3. Settings ( 11.9)
4. Information ( 11.17)
11.9 Settings
1. iMOW®:
Adapt machine settings
( 11.10)
2. Installation:
Adapt and test the installation
( 11.13)
3. Safety:
Adapt the safety settings (
4. Service:
Maintenance and service (
5. Dealer area:
The menu is protected by the
dealer code. Your specialist
dealer performs a variety of maintenance
and service operations with the aid of this
menu.
11.10 iMOW® – machine settings
1. Mow plan type:
Standard: The robotic mower mows the
lawn throughout the entire active time.
Mowing operations are only interrupted for
charging. The mow plan type Standard is
preset.
Dynamic: The number and duration of
mowing and charging times are adapted
fully automatically within the active times.
2. Rain sensor:
The rain sensor can be set so that
mowing is interrupted or does not
start when it is raining.
● Setting the rain sensor (
3. Status screen:
Select the information that is to
appear in the status screen.
( 11.2)
● Setting the status screen (
11.15)
11.16)
11.11)
11.12)
139