Stihl RMI 422.1 Gebrauchsanleitung Seite 166

The date and time may need to be
corrected following storage for a
long period. Appropriate selection
windows are displayed during initial
operation. If the selection windows
are not automatically displayed,
check the date and time in the
"Settings" menu and correct if
necessary. ( 11.10)
● Prepare the mowing area:
Remove foreign objects and cut high
grass short using a conventional lawn
mower.
● Uncover the docking station and
connect the power supply unit to the
mains supply.
● Charge the battery ( 15.7)
● Check the mowing plan and change as
necessary. ( 11.7)
● Follow the edge area and check
whether corridors and confined areas
can be travelled on.
Remove obstacles and foreign bodies
in the edge area.
● Switch on automatic mowing (
● RMI 422 PC:
If necessary, activate Standard energy
mode ( 11.10) and switch on GPS
protection. ( 5.9)
16.9 Removing the docking station
The docking station can also be removed
if the robotic mower is to be stored for
long periods (e.g. winter break).
● Preparing the robotic mower for storage
for a long period ( 16.8)
● Disconnect the power supply unit plug
from the mains
164
● Remove the docking station cover and
open the panel (
1 Fold open the right clamping lever (1).
2 Remove the right wire end (2) from the
terminal block.
Close the clamping lever (1) again.
3 Fold open the left clamping lever (3).
4 Remove the left wire end (4) from the
terminal block.
Close the clamping lever (3) again.
11.7)
● Close the panel (
● Guide the right and left wire ends out of
the docking station separately from
each other
● Fit the docking station cover (
9.2)
Pull out the pegs (1), remove the docking
station (2) from the lawn with the power
supply unit connected, clean thoroughly
(with a moist cloth) and put into storage.
● Store the robotic mower together with
9.2)
● Protect the terminals of the perimeter
● Reinstall the docking station in the
9.2)
17. Standard spare parts
Mowing blade:
6301 702 0101
the docking station and the power
supply unit in the normal position and in
a dry, closed and dust-free room. Dock
the robotic mower in the docking
station. Make sure that the machine is
kept out of the reach of children.
wire from environmental influences
(e.g. wrap with suitable insulating
tape).
same way as during initial installation –
in particular connect the right and left
perimeter wire ends on the correct
sides. ( 9.8)
0478 131 9957 A - EN