Stihl RMI 422.1 Gebrauchsanleitung Seite 172

– Faults are awarded the priority
"Medium" and require action on the
part of the user.
The robotic mower can only be
operated again once the fault has been
rectified.
– In the case of errors awarded the
priority "High", the text "Contact
your specialist dealer" appears on the
display.
The robotic mower can only be
operated again once the fault has been
rectified by a STIHL specialist dealer.
If a message is still active despite
the proposed remedial action,
please contact your STIHL
specialist dealer.
Faults that can only be rectified by
a STIHL specialist dealer are not
listed in the following. Should a fault
of this kind occur, please
communicate the 4-digit fault code
and the fault text to your specialist
dealer.
RMI 422 PC:
Messages that impair normal
operation are also reported to the
app. ( 10.)
The robotic mower enters standby
after the message is sent and
disables radio communication to
preserve the battery.
Message:
0001 – Data updated
Press OK to release
Possible cause:
– The machine software has been
updated
– Voltage loss
170
– Software or hardware error
Remedy:
– After the OK button is pressed, the
robotic mower operates with the default
settings – check and correct the
settings (date, time, mowing plan)
Message:
0100 – Battery discharged
Charge battery
Possible cause:
– Battery voltage too low
Remedy:
– Place the robotic mower in the docking
station to recharge the battery (
Message:
0180 – Temperature low
Main circuit board
Possible cause:
– Temperature inside the robotic mower
too low
Remedy:
– Allow robotic mower to warm up
Message:
0181 – Temperature high
Main circuit board
Possible cause:
– Temperature inside the robotic mower
too high
Remedy:
– Allow robotic mower to cool down
Message:
0183 – Temperature high
Charge control circuit board
Possible cause:
– Temperature inside the robotic mower
too high
Remedy:
– Allow robotic mower to cool down
Message:
0185 – Temperature high
Drive control circuit board
Possible cause:
15.7)
– Temperature inside the robotic mower
too high
Remedy:
– Allow robotic mower to cool down
Message:
0186 – Temperature low
Battery
Possible cause:
– Battery temperature too low
Remedy:
– Allow robotic mower to warm up
Message:
0187 – Temperature high
Battery
Possible cause:
– Battery temperature too high
Remedy:
– Allow robotic mower to cool down
0478 131 9957 A - EN