Troubleshooting; Technical Data - Cleanmaxx AC-1107-3 Z 09506 Gebrauchsanleitung

Troubleshooting

If your device no longer functions properly, exhibits damages or requires a spare part,
please contact our customer service centre. For your own safety, do not perform any
repairs yourself. The following table gives you tips on how to resolve minor problems
yourself.
Problem Potential cause/solution/tips
•
The vacuum cleaner
•
has no suction
power.
•
•
•
•
The suction power
•
is weak.
•
The device •
emits dust when
vacuuming.
The power cord •
cannot be wound up
completely.
•
An unpleasant
odour develops
when vacuuming.

Technical data

Model number: AC-1107-3
Product number: Z 09506
Voltage supply: 220 – 240 V~, 50 Hz
Output: 900 W
Safety class: II
09506_de-gb-fr-nl_V1.indb 26 09506_de-gb-fr-nl_V1.indb 26
Is the mains plug not correctly connected with the socket?
Correct the position of the mains plug.
Is the socket defective? Try another socket.
Check the fuse for your mains connection.
Are the fi lters plugged? Clean them.
Is the auxiliary air valve on the handle open? Close it.
Is the dust bin too full? Empty the bin.
Are the fi lters very dirty? Clean them.
Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off, pull the mains plug out of the socket and
remove the obstruction (also see chapter "Assembly").
Has the dust bin not been closed properly and/or is it not
(properly) inserted in the device? Correct this.
The cord has not been properly wound up in the device. Pull
it out somewhat and then push the button
the cord winder again.
Are you using the device
An odour often develops when using new devices for the
fi rst time. The odour should disappear once you have used
the device a few times.
26
for engaging
for the fi rst time?
17.11.2014 13:38:30 17.11.2014 13:38:30