Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11.13 W&M Info
For more information on the keys necessary to access this menu group, go to
the
Navigation
Pilot.
In the W&M Info group you can check that the set scale parameters match the
values stipulated for scales subject to weights and measures legislation. Any
deviations are displayed.
Menu
Select group 1-9
W&M Setup OK
Error: Overload > 9d
→ Check the settings (allowable values in brackets)
Motion window
Motion counter
Autozero range
Pushbutton range
Overload
WTX110
Key
(0.5d)
(≥7)
(0.5d)
(≤4 %)
(max. 9d)
A4774-1.0 HBM: public
Function/Secondary selection
Press 9 x for group 9 W&M Info
Display when setting is correct
Display when the set values do not
comply with approval requirements
Example: Value for overload display
suppression is set higher than 9d.
Continue
Calibration
191
Werbung
