HBM WTX110 Bedienungsanleitung Seite 109

Weighings
Total
Clear total?
Fig. 7.7 Flowchart for monitoring setpoint value and weighing
Checkweighing is activated as soon as the scale is loaded with no more than
10 % of the setpoint value and the idle state is detected. Then the
corresponding output signal is set and remains until the weight on the scale
WTX110
Total
1
OK
250 g
OK
No
A4774-1.0 HBM: public
CHECK
>1s
Target
CHECK
Place test weight
Yes
Weighings and
total will be
deleted
Operating modes
250
OK
Weigh
107