Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
'Low pressure mode'
Connect the steam lance to the hose/spray gun (see picture below).
Turn the selection valve to position low pressure mode (low pressure mode)
(horizontally (D) see picture below). Turn the main switch again to position 1=ON.
Operate the spray gun again. Pay attention on sufficient fuel in the tank.
Turn the temperature regulating knob to the right (any position).
Start the 'low pressure' cleaning activities.
Note: the fuel pump stops working after 10 seconds, when the spray
gun is released. When activating the spray gun again -> pump starts
again.
DiBO 21
A
D
B
E
C
E N
O P E R AT I O N
Werbung
