Endress+Hauser RID16 Bedienungsanleitung Seite 32

Installation
2. Fit the device on the wall with 4 screws (⌀5 mm (0.2 in)).
4.3.2 Pipe mounting
The mounting bracket is suitable for pipes with a diameter between 1" to 5". The mounting kit
consists of a mounting plate (item 1), 2 clamps (item 2) and 4 screws (item 3).
Proceed as follows to mount the device on a pipe:
1.
 3 Mounting the field indicator on a pipe with mounting kit, steps 1-2
3.
3
3mm
 4 Mounting the field indicator on a pipe with mounting kit, steps 3-4
1 Mounting plate
2 Mounting bracket
3 4 screws
32
2.
1
2
4.
3
RID16
A0011269
A0011270
Endress+Hauser