CEMO DT-Mobil Easy 210l Betriebsanleitung Seite 30

GB
5 Operation
5.1 DT-Mobil Easy
5.1.1 Storage
During transport and storage, do not expose the
DT-Mobil Easy to direct sunlight for an extended
period of time. Excessive heating can lead to
deformation of the high-quality plastic tank and a
reduction in the quality of the fuel.
Suitable storage conditions:
• Ambient temperatures from -10 °C to +40 °C.
• Level surface.
• Cover for outdoor storage.
• Stackability:
►Max. 2 empty (!) tanks one above the other
i
Important:
When stacking:
• For the version with lid, the lid must be closed.
• To fasten, the four fixing pins on the top of the
tank must engage in the four recesses on the
underside of the tank.
5.1.2 Loading the filling station
5.1.2.1 Loading by hand
Empty DT-Mobil Easy
can be loaded by hand
using the recessed grips
at the front and rear of the
tank.
Note the weights of the
empty systems:
• 210l = 19 - 24 kg
• 210l Pick-up = 26-34 kg
• 440l = 33 - 40 kg
• 440l Basic = 48 kg
• 440l Premium = 62 kg
• 440l/50l = 51 - 58 kg
30
5.1.2.2
5.1.3
During transport, observe the applicable regula-
tions for transport and securing loads, in particular:
•
•
•
To enable the tank to be fastened to the trans-
port vehicle by means of suitable tension belts
(35 mm), lay the tension belts in the integrated
recesses on the tank.
Belt recesses
Recessed grip
Loading with forklift
i
Important:
For safe lifting with a forklift, use the
moulded recesses on the underside.
Transporting
road traffic (licensing) regulations of the country
concerned,
CEN 12195 Parts 1 to 4 for calculation and
lashing,
For the version with hinged lid, the lid must be
closed and locked.
DT-Mobil Easy 440l and Combi 440/50l
Forklift
DT-Mobil Easy 210l