Safety; Export - Wellsystem MEDICAL Gebrauchsanweisung

Safety

Danger!
Assembly and electrical connection must comply with the na-
1)
tional regulations .
underlies special preventive measures
with regard to the electromagnetic compatibitlity and must be in-
stalled and commissioned according to the EMC instructions
obtained from the assembly instructions.
Assembly, installation, upgrading or servicing of the device may
only be carried out by personnel specially trained and author-
ised by JK-Global Service.
• The device may only be operated in proper condition!
• All danger and safety notes attached to the device must be observed!
• No safety equipment (e.g. switches) or safety notes may be removed
or deactivated which can impair the safe operation of the device!
• The massage unit must never be run when it is empty!
• Massage units that do not have a cooling system attached to them
must never be operated for longer than 3 hours without a break.
• A water cooling system must be connected to the unit if the utilisation
period will exceed 3 hours/day. The cooling water drainage hose
must never be removed.
• We recommend using a water shut-off valve (water flow control).
• Only personnel who, due to their training or knowledge and practical
experience, can guarantee correct handling of the equipment are
allowed to operate the machine.
1) In Germany: VDE regulations
40
• High frequency mobile communication systems can impair the func-
tioning of the device.
• Any thermal therapy units (microwave therapy units, etc.) located in
the vicinity might cause electro-magnetic interference. Please let cus-
tomer service know if this is the case (see Page 2).
• A line impedance of 0.14 ohms must be guaranteed for pulse
massaging.

Export

We emphasise that these devices are intended for the European market!
The manufacturer shall assume no liability whatsoever in case of non-ob-
servance! We explicitly emphasise that high liability risks may occur for
the exporter an/or the operator in case of non-observance.