D) Frequency Selection For Video Transmission; E) Sensitivity Selection For Control Stick - Reely X-190 RTF Bedienungsanleitung

d) Frequency selection for video transmission

The transmitter will automatically find the best frequency to ensure quality live video transmission. In case there is any
interference in your location, you can change the frequency to obtain a better video transmission.
• Pull the left throttle control stick (11) to the lowest position and press down the right elevator control stick (18) for 1
second to enter the main menu. See Fig. 11.
• Move the right elevator control stick up or down to choose "5.8G Frequency".
• Push the right elevator control stick to select a matched frequency.
• To leave the menu, select "exit" and push the right elevator control stick.
X4
8.2V
R 1
MAIN MENU
P 0
Set Sensitivity
H 0
5.8G Frequency
Show version
Exit

e) Sensitivity selection for control stick

You can change the sensitivity of any of the control stick functions. A higher sensitivity value will enable a faster
reaction to the movement of the quadrocopter. A lower sensitivity value will enable slower reaction to the movement
of the quadrocopter.
• Pull the left throttle control stick to the lowest position and press down the right elevator control stick for 1 second
to enter the main menu. See Fig. 12.
• Move the right elevator control stick up or down to choose "Set Sensitivity". Push the right elevator control stick.
• Press the elevator / aileron / rudder trim button to set the sensitivity.
• To leave the menu, select "exit" and push the right elevator control stick.
X4
8.2V
R 1
MAIN MENU
P 0
Set Sensitivity
H 0
5.8G Frequency
Show version
Exit
X4
8.2V
R 1
P 0
H 0
Fig. 11
X4
8.2V
R 1
P 0
H 0
Fig. 12
5.8G FREQUENCY
Exit
5810MHz
Set Sensitivivity
Exit
Normal mode
Elevator : 50
Aileron : 50
Rudder : 50
47