B) Control Stick Calibration; C) Prepare For Video/Photo - Reely X-190 Rtf Bedienungsanleitung

b) Control stick calibration

• Push both control sticks to the upper left corner and power on the transmitter simultaneously.
• Rotate both control sticks in circles for three times, then release both control sticks.
• Long press any trim button until the status LED (15) on the transmitter turns green. A "beep" indicates a successful
calibration.
Fig. 8

c) Prepare for video/photo

• Adjust the camera angle according to your requirements. You might need to use the screwdriver to loosen and
tighten the side screws holding the camera. The camera angle can be adjusted from -8° to +45°. See Fig. 9.
• Insert a Micro SD card (not included) into the SD card slot at the side of the quadrocopter before using the photo/
video function (Micro SD card with max. 32 GB capacity / min. class 10). Please make sure that you insert the Micro
SD card gently and in the correct direction to avoid possible damage to both components. See Fig. 10.
• Press the photo button (3) for 0.5 second to take photos. Photos are saved automatically on the Micro SD card.
• Press the video button (8) for 0.5 second to take videos. Press the video button again to stop recording and to
save the video.
Stop recording before the Micro SD card is removed.
A video with a length of 1 minute requires approx. 100 mb.
Fig. 9
• To copy the recorded videos and photos to your computer use a suitable card reader and insert the Micro SD
card in the device. Please make sure that you insert the Micro SD card correctly to avoid possible damage to both
components.
• In Windows open "My PC / Devices" and you will see that a new storage device has been recognized.
®
• Open the device and you will see one folder for videos and another folder for photos. The photos will be saved in
JPEG format and the videos as AVI files. If your computer is unable to open or play these standard formats, you will
have to convert the files or download alternative software.
46
Fig. 10