Safety Instructions; General Information; Before Commissioning - Reely X-190 RTF Bedienungsanleitung

7. Safety instructions

Damage arising due to failure to follow these instructions will void the warranty. We shall not be
liable for any consequential damages.
We shall not be liable for damage to property or personal injury caused by incorrect handling or
failure to observe the safety information! Such cases will void the warranty/guarantee.
Normal wear and tear and accident and crash damage (e.g. broken rotor blades or chassis parts) are also
excluded from the guarantee and warranty.
Dear Customer,
These safety instructions are provided to ensure the safe operation of the product. Read this section
carefully before using the product for the first time.
a) General information
Caution, important note!
Operating the model may cause damage to property and/or individuals. Therefore, make sure that
you are sufficiently insured when using the model, e.g. by taking out private liability insurance. If
you already have private liability insurance, verify whether or not operation of the model is covered
by your insurance before commissioning your model.
Observe: In some countries you are required to have insurance for all model aircraft!
• The unauthorized conversion and/or modification of the product is inadmissible for safety and approval
reasons (CE).
• This product is not a toy and not suitable for children under 14 years of age.
• The product must not become damp or wet.
• If you do not have sufficient knowledge as to how to deal with remote-controlled models, please seek the
advice of an experienced model maker or a model making club.
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• Should questions arise that are not answered by these operating instructions, contact us (for contact
information, see chapter 1) or another expert.
The operation and handling of remote controlled quadrocopters must be learned! If you have
never steered such a model, start especially carefully and get used to the reactions of the model
to the remote control commands first. Be patient!
b) Before Commissioning
• Make sure that no other models are operated within the range of the remote control on the same 2.4 GHz
band (transmitter frequency). Always check if concurrently operated 2.4 GHz transmission systems
interfere with your model.
• When switching on the quadrocopter, stick with the procedure described in chapter 9 for flight preparation
of the quadrocopter. This is the only way for an attunement function (binding) to take place between
transmitter and receiver, so that your model will react reliably to the control commands of your transmitter.
36