Herunterladen Diese Seite drucken

Parkside PGKGA 40-Li B2 Originalbetriebsanleitung Seite 55

Garten-akku-kombigerät 40 v
Vorschau ausblenden Andere Handbücher für PGKGA 40-Li B2:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
c) Children, individuals with limited phy-
sical, sensory or mental capabilities, as
well as those who have insufficient expe-
rience or knowledge or are not familiar
with the instructions must never be permit-
ted to use the device. Local regulations
may specify an age limit for the user.
d) Note that the user is responsible for
any accidents or risks to others and
their property.
Preparation
a) Before use, check the machine for da-
maged, missing or incorrectly installed
safety devices or covers.
b) Never use the device if people – espe-
cially children – or pets are nearby.
Operation
a) Always wear eye protection, long
trousers and sturdy shoes whenever
using the machine.
b) Do not use the machine in poor we-
ather, especially if there is a risk of
lightning.
c) Use the machine only in daylight or
with good artificial lighting.
d) Never use the machine if the cover or
guard is damaged, or without a cover
or guard.
e) Only switch on the motor when your
hands and feet are out of the range of
the cutting unit.
f)
Always disconnect the machine from
the power supply (i.e. remove the re-
movable battery)
1) whenever leaving the machine
unattended,
2) before removing blockages,
3) before checking, cleaning or mo-
difying the machine,
4) after contact with a foreign
object,
5) if the machine begins to vibrate in
an unusual way.
If the device starts to vibrate ab-
normally strong, an immediate
inspection is required.
- search for signs of damage;
- have any necessary
repairs carried out on
damaged parts;
– make sure that all nuts, bolts and
screws are properly tightened.
g) Be careful to avoid injuries to your
feet and hands by the cutting unit.
h) Make sure to keep the ventilation
openings free of foreign objects.
i)
Never replace a non-metallic cut-
ting unit with a metallic cutting
unit.
j)
Avoid an abnormal body posture,
keep your balance at all times and
ensure secure footing on slopes.
Walk when holding the device in your
hand. Do not run!
k) Never operate the machine with
defective guards or covers or wi-
thout protection or without guards.
l)
Warning! Ensure that you do not
touch any of the dangerous mo-
ving parts before you have remo-
ved the rechargeable battery and
that the dangerous moving parts
have come to a complete standstill.
Maintenance and storage
a) Always disconnect the machine from
the power supply (i.e. remove the re-
movable battery) before performing
maintenance or cleaning.
b) Only use spare and accessory parts
recommended by the manufacturer.
c) Regularly inspect and maintain the
machine. Only have maintenance per-
formed by a contract workshop.
GB
MT
55

Werbung

loading