Intended Use; Information In The Event Of An Emergency - ProMinent DULCOTEST ICT 5 Montage- Und Betriebsanleitung

2.4

Intended use

Only use the sensor to measure and regu‐
n
late electrolytic conductivity in aqueous
media, which are used in the applications
described in these operating instructions.
All other uses or modifications are pro‐
n
hibited.
The sensor is not a safety component in
n
the sense of DIN EN ISO
13849-1:2008-12. If there is a critical
process in your measurement and control
circuit, then it is your responsibility to make
sure this process is safe.
2.5 Information in the event of
an emergency
In the event of an emergency, switch off
n
the controller
If liquid escapes from the continuous flow
n
gauge, close the stopcocks on the inlet
and outlet installed by the customer
Observe the plant operator's safety infor‐
n
mation before opening the continuous flow
gauge
Safety and responsibility
17