Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Tool (cutter head with cutter ring)
– cutter head diameter
– cutter ring diameter
– cutter ring width
– cutter head width (cutting width)
– tool holding fixture diameter
– rated idling speed
– speed at regular load
– cutting rate at regular load speed
– feed rate
– feed force
– cutting length
– tilt range of tool assembly
Machine dimensions and weight
– width x length x height
– working height
– dimensions of infeed table (W x L x H)
– weight without infeed table
– weight of infeed table
– diameter of extraction connection pipe
1.4 Scope of delivery
Tenon cutting machine ZAF 250 Vario complete with:
– 3 m (9.9 ft) infeed table
– device for transport by fork-lift truck
– special milling tool
– operating tool
– push-type grease gun
– Operating Instructions
1.4.1
Special accessories
– extraction kit
1.5 Noise emission data
The average noise values over the total machining cycle are as follows:
Noise level
workplace-related emission
An additional K = 4 dB must be allowed on the above emission values for measuring in-
accuracy.
0.9-2.2 m/min. (2.9 - 7.2 ft/min)
1400 x 1400 x 1450 mm (55 x 55 x 57 3/32 in.)
Tenon cutting
108 dB (A)
93 dB (A)
– 26 –
100 mm (3 15/16 in.)
165 mm (6 1/2 in.)
40 mm (1 9/16 in.)
110 mm (4 5/16 in.)
30 mm (1 3/16 in.)
32.8 m/s (108 ft/s)
approx. 800 N
320 mm (12 5/8 in.)
780 mm (30 45/64 in.)
350 x 3000 x 900 mm
(13 3/4 x 118 7/64 x 35 1/2 in.)
380 kg (836 lbs)
83 kg (182.6 lbs)
2 x 100 mm(3 15/16 in.)
Order no. 202 320
Flattening
108 dB (A)
94 dB (A)
6670 rpm
6260 rpm
0–60°
Werbung
