Palfinger PK 48000 Betriebsanleitung Seite 60

5.1-1
• Fold in the hinged arm completely.
•
Slew the crane across the direction of travel, observe the
marking (retraction arrows) on the crane pillar and crane
base.
•
Fold in the extendable arm until the load arm rests in the
support for it on the crane base.
If the load arm folded down onto the loading surface is not secured
adequately against moving out sideways or maximum headroom heights
are not observed serious accidents can occur. There is a danger of
injury and death for you and other road-users.
If the load arm does not rest on the crane base but on the loading surface it must be specifically
secured against moving out sideways.
In such a case, please remember that depending on the main boom's position the total height of the
vehicle can increase and that clear heights must be observed.
If the load arm folded down onto the loading surface is not secured
adequately against moving out sideways or maximum headroom heights
are not observed serious accidents can occur. There is a danger of
injury and death for you and other road-users.
Ending crane operation