Reely 2356860 Bedienungsanleitung Seite 45

12. Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this product conforms to
Directive 2014/53/EU.
Click on the following link to read the full text of the EU Declaration of Conformity:
www.conrad.com/downloads
Select a language by clicking on the corresponding flag symbol and then enter the product order number
in the search box. The EU Declaration of Conformity is available for download in PDF format.
13. Troubleshooting
This model was built using the latest technology. However, faults and malfunction may still occur. The following section
shows you how to troubleshoot potential faults. Ensure that you also read the remote control instructions included
with the product.
The model does not respond or does not respond correctly
• In the case of 2.4 GHz remote control systems, the receiver must be connected to the remote control. This process
is known as "pairing". The manufacturer pairs the remote control with the receiver before the vehicle is shipped.
However, you can also pair the remote control yourself. To do this, follow the enclosed operating instructions for
the remote control.
• Is the vehicle battery or the remote control batteries empty? If so, replace the vehicle battery or remote control
batteries.
• Did you switch on the remote control before switching on the speed controller? For safety reasons, the speed
controller does not function if this is done in the reverse order.
• Is the vehicle battery connected to the speed controller? Check the connection to see if it is dirty or rusted.
• Is the vehicle too far away? The range should be at least 50 m when the vehicle battery and the remote control
batteries are full. However, this can be reduced by the ambient conditions, such as interference on the transmission
frequency or proximity to other transmitters (including Wi-Fi/Bluetooth
of 2.4 GHz), metal objects and buildings.
The position of the remote control and receiver aerials relative to one other also has a significant impact on the
range. For best results, the remote control and receiver aerial should be vertical (i.e. parallel to each other). Pointing
the remote control aerial at the vehicle significantly reduces the range.
• Check the correct position of the speed controller plug and steering servo on the receiver. If the plugs have been
rotated 180°, the speed controller and steering servo will not work.
If the connectors for the speed controller and steering servo are connected the wrong way round, the throttle/brake
servo will control the steering servo (and vice versa).
devices that use a transmission frequency
®
45