Reely 2356860 Bedienungsanleitung Seite 38

h) Attaching and securing the chassis
Connect the LEDs in the body via the corresponding plug connection. Place the chassis onto the fixtures and fix it in
place it with the clips.
i) Controlling the vehicle
Place the vehicle on the ground. Do not reach into the engine or hold the wheels.
Move the throttle/brake lever on the remote control very carefully and drive slowly until you are familiar with
how the vehicle responds to the remote control. Do not make sudden adjustments to the remote control
levers.
If the vehicle shows a tendency to move to one side, adjust the steering trim on the remote control accordingly.
The following images are for reference purposes only and do not necessarily correspond to the design of
the remote control included with the product!
The control refers to the F/R setting on the speed controller, see chapter 9. b).
1. Release the throttle/brake lever (move it to the neutral position). The vehicle should roll to a halt or stay stationary
(if necessary, adjust the throttle trim on the remote control).
2. Slowly pull the throttle/brake lever towards the handle to make the vehicle move forwards.
3. Slowly push the throttle/brake lever away from the handle to make the vehicle move backwards.
Do not switch immediately between forwards/reverse. Bring the vehicle to a standstill first before moving it
in the other direction. Directly switching to another direction may overload the drive components.
38