C) Setting Up Or Mounting The Outdoor Sensor; D) Setting Up Or Mounting The Weather Station - Conrad S3318P Bedienungsanleitung

c) Setting up or Mounting the Outdoor Sensor

• If there is a protective foil on the display, remove it now.
• The included holder serves to set up on a level surface and for wall mounting.

To be able to read the display integrated in the outdoor sensor, we recommend that
the outdoor sensor be installed to the left or right of a window.
Select the mounting site so that the outdoor sensor is not subject to direct solar
irradiation, because temperature measurement will otherwise be incorrect. The same
applies if rain or snow gets on the outdoor sensor.
• For setting up,. the outdoor sensor is attached to the holder in the correct alignment. Then
the base at the back of the holder can be folded out.
• The holder has an opening for wall mounting.
Attach to the outdoor sensor to the holder in the correct alignment. Then suspend the holder
on a nail, screw or hook from the intended opening.

d) Setting up or Mounting the Weather Station

• If there is a protective foil on the display, remove it now.
• Like the outdoor sensor, the weather station can also be set up on a horizontal, stable,
sufficiently large area or alternatively mounted on a vertical wall.
• The included metal base must be screwed into the thread (13) for setting up. Do not use any
tools and do not apply any force!
Use a suitable pad on valuable furniture surfaces to prevent scratches.
• The back of the weather station has an opening (7) for wall mounting.
Suspend the weather station on a nail, screw or hook.
Due to its high weight, the weather station must be attached stably. Falling off of the
weather station will damage it; loss of warranty and guarantee!
45