Herunterladen Diese Seite drucken

Bosch MUMS6 Serie Gebrauchsanleitung Seite 49

Vorschau ausblenden Andere Handbücher für MUMS6 Serie:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
15.1 Fine adjustment of beat-
ing whisk
Use the fine adjustment system to
correct the distance between the
bowl and the beating whisk.
Note: The beating whisk has been
factory-set so that ingredients are
mixed together perfectly.
Correcting tool adjustment
ATTENTION!
The appliance and tools can be dam-
aged if a wrong tool setting is used.
Never operate a tool that has not
been set properly.
Requirements
¡ The mains plug is not inserted.
¡ The swivel arm is open.
¡ The beating whisk is inserted.
¡ The bowl has been inserted.
Hold the beating whisk at the bot-
1.
tom with one hand and release the
lock nut clockwise using a spanner
wrench.
28
→ Fig.
To change the setting, turn the tool
2.
in the desired direction.
→ Fig.
29
Observe the table:
Optimum set-
ting
Turn clockwise
Turn anticlock-
wise
Press the release button and push
3.
the swivel arm down until it en-
gages.
Check the setting.
4.
Press the release button and raise
5.
the swivel arm until it engages.
The tool is
touching the
bowl lightly.
Lift tool
Lower tool
Hold the beating whisk at the bot-
6.
tom with one hand and tighten the
lock nut anticlockwise using a
spanner wrench.
16 Disposal
16.1 Disposing of old appli-
ance
Valuable raw materials can be re-
used by recycling.
Unplug the appliance from the
1.
mains.
Cut through the power cord.
2.
Dispose of the appliance in an en-
3.
vironmentally friendly manner.
Information about current disposal
methods are available from your
specialist dealer or local authority.
This appliance is la-
belled in accordance
with European Directive
2012/19/EU concerning
used electrical and elec-
tronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determ-
ines the framework for
the return and recycling
of used appliances as
applicable throughout
the EU.
17 Customer Service
Function-relevant genuine spare parts
according to the corresponding Eco-
design Order can be obtained from
Customer Service for a period of at
least 7 years from the date on which
Disposal en
49

Werbung

loading