Bosch MUMS6 Serie Gebrauchsanleitung Seite 41

8.1 Changing the basic set-
tings
In the main menu use
1.
select "Setting" and confirm with
⁠ .
Use or to select the required
2.
setting and confirm with
Use or to select further op-
3.
tions or change settings and con-
firm with ⁠ .
To leave an option or setting and
4.
go back a level, press
8.2 Overview of basic set-
tings
You can find an overview of the basic
settings here.
Setting
Language
Accessory
Sound
Quick access Activate or deactiv-
Unit
Brightness
Idle mode
or
⁠ .
⁠ .
Description
Select the display
language.
Activate or deactiv-
ate available access-
ory. The activated
accessory appears
in the main menu
and additional auto-
matic programmes
are available.
Set the volume of the
audible signals and
button tones.
ate automatic taring
of the scales.
Set the units for the
scales.
Select the brightness
of the display.
Set the time after
which the display
switches off.
Setting
Standby time Set the time after
to
Restore the
factory set-
tings
Appliance in-
formation
9 Timer
You can use the timer to set the re-
quired processing time.
9.1 Setting the processing
time
In the main menu use
1.
select "Timer" and confirm with
Use
2.
confirm with
Use
3.
and confirm with
a The display shows "Select setting"
and the processing time selected.
Set the rotary switch to the re-
4.
quired speed.
a The display shows the speed se-
lected and the remaining pro-
cessing time.
a Once this time has elapsed, the
appliance stops processing and
the display shows "Set level" ⁠ .
10 Scales
Your appliance is equipped with built-
in scales.
The main unit has 4 weight sensors
in its feet.
Description
which the appliance
switches to power
saving mode.
Reset appliance to
the factory settings.
Information about the
appliance software.
or to set the minutes and
⁠ .
or to set the seconds
⁠ .
Timer en
or to
⁠ .
41