Herunterladen Diese Seite drucken

Bosch MUMS6 Serie Gebrauchsanleitung Seite 47

Vorschau ausblenden Andere Handbücher für MUMS6 Serie:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Fault
An error code ap-
pears on the display,
e.g. "E102".
"INSERT BOWL" ap-
pears on the display.
"CHECK SWIVEL ARM
POSITION" appears
on the display.
"MOTOR STOPPED
AUTOMATICALLY" ap-
pears on the display.
"PARK POSITION
NOT REACHED:
PLEASE SWITCH ON
MOTOR SETTING 1
AND SWITCH OFF
AGAIN." appears on
the display.
"CHECK COVER" ap-
pears on the display.
"CHECK DISPLAY" ap-
pears on the display.
"ALLOW APPLIANCE
TO COOL DOWN" ap-
pears on the display.
Cause and troubleshooting
The electronics have detected a fault.
Set the rotary switch to
1.
plug.
Re-insert the mains plug in the socket.
2.
If the fault persists, call Customer Service.
3.
→ "Customer Service", Page 49
Bowl is not inserted or not engaged correctly.
Insert the bowl and turn it anticlockwise as far as
possible.
Swivel arm is not engaged properly or has become
detached.
Set the rotary switch to
1.
Move the swivel arm until it engages correctly.
2.
Different causes are possible.
Set the rotary switch to
1.
If the fault persists, call Customer Service.
2.
→ "Customer Service", Page 49
Drive is not in the parked position.
Set the rotary switch to
1.
When the swivel arm is open, remove the tool and
2.
close the swivel arm.
Set the rotary switch briefly to and then back to
3.
a The drive remains on for a short time until the
parked position is reached.
No cover or accessory fitted to drive 2 or 3.
Close drive 2 or 3 with its cover.
1.
Fit an accessory to drive 2 or 3 and check it is po-
2.
sitioned correctly.
Touch display is soiled or has been accidentally activ-
ated.
Clean the display with a damp microfibre cloth.
1.
Make sure that no objects touch the display acci-
2.
dentally.
Motor is overheated.
Set the rotary switch to
1.
If you are processing a large quantity of ingredi-
2.
ents, reduce the quantity to prevent overheating.
If a tool or accessory is blocked, remove the block-
3.
age.
Allow the appliance to cool down to deactivate the
4.
overload protection device.
Troubleshooting en
and pull out the mains
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
47

Werbung

loading