Bosch MUMS6 Serie Gebrauchsanleitung Seite 43

¡ Cream that was previously frozen
cannot be whipped.
¡ For optimal results after selecting
the programme "Whipped Cream"
set the type of cream you are us-
ing. e.g. fresh cream, long-life
cream, vegan cream or lactose-
free cream.
¡ Do not use bowls that are warm
when whipping cream, e.g. directly
out of the dishwasher.
¡ Do not add sugar, flavourings or
other additives for cream or
beaten egg white until the auto-
matic programme has ended.
¡ Take note of the ingredients and
quantities suggested.
¡ The automatic programmes for
dough will not function if it is too
dry. Dough recipes need a suffi-
cient quantity of liquid or moist in-
gredients.
¡ The programme "Yeast dough and
sourdough" interrupts kneading for
approx. 15 minutes so the dough
can prove. Another kneading pro-
cess then starts automatically. Do
not take the dough out until the
end of the programme.
¡ For the programmes "Cake mix-
ture" and "Shortcrust pastry" heat
the butter or margarine to room
temperature and use in cubes
2 cm in size. Cold or frozen butter
or margarine will not deliver the
desired results. Leave shortcrust
pastry to rest in the refrigerator be-
fore baking.
¡ The programme "Cake mixture" is
not suitable for very liquid consist-
encies, e.g. pancake batter.
Automatic programmes en
Notes
¡ If the processing result of the auto-
matic programme does not meet
your wishes, continue processing
the ingredients manually until you
get the desired result.
– Cream and egg white at setting
7
– Sponge cake mix at setting 4
– Other doughs/mixes at setting
3, e.g. yeast dough
¡ If an accessory has been activated
in the basic settings, it appears in
the main menu and further auto-
matic programmes are available.
11.1 Using automatic pro-
grammes
In the main menu use
1.
select "Automatic" or an activated
accessory and confirm with
Use or to select the required
2.
automatic programme and confirm
with ⁠ .
Depending on the programme,
‒
select the ingredient quantity
displayed or "Scale".
Add the ingredients and follow the
3.
instructions on the display.
If the display shows "Set level" ,
4.
set the rotary switch to
a The display shows an animation
and the automatic programme is
running.
a When the preprogrammed result
has been achieved, the appliance
stops processing and the display
shows "Set level" ⁠ .
or to
⁠ .
⁠ .
43