Hach POLYMETRON 8310 Benutzerhandbuch Seite 7

Table 3 Sensor installation depth and pipe diameters (continued)
Sensor
(h maximum)
8317
8394
Figure 3 Flow chamber dimensions
1 2-inch clamp
Section 3 Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
3.1 Connect the sensor cable
Connect the IP65 connector of a conductivity sensor cable to the sensor. Refer to
The conductivity sensor cable is sold separately. Refer to
on page 20 for the cable lengths available.
A
(H minimum)
28 mm
21.5 mm 65.5 mm
C A U T I O N
B
90 mm
2 1.5-inch clamp
Consumables and accessories
D
(minimum diameter of pipe)
DN75 or 3 inch
DN50 or 2 inch
Figure 4.
English 7