ATH-Heinl Four Lift 64AP Bedienungsanleitung Seite 82

Content
Lighting kit
Content
Accessories
Electric box
Note
If anything is missing from the package, please contact our sales department.
2.4 Location
The machine should be kept away from flammable and explosive materials, as well as from sunlight and intense
light. The machine should also be placed in a well-ventilated place.
The machine should be installed on sufficiently solid ground, if necessary according to the minimum
requirements of the specifications in the foundation plan.
When selecting the installation site, the guidelines and instructions of the accident prevention regulations and
the workplace regulations must be observed in addition to the ground conditions.
If the unit is to be installed on a floor slab, its sufficient load-bearing capacity must be checked. In general, it
is recommended that a building expert be consulted for an assessment when installing the machine on floor
ceilings.
The machine is only to be installed and used inside closed rooms. It does not have appropriate safety equipment
(e.g. IP protection, galvanized design) for outdoor use.
Temperature
Sea level
Humidity
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
82
Number of Length
packages
1 1350 mm
Number of Length
packages
1 1720 mm
Release date: 02.06.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
Width
150 mm
Width
360 mm
5 - 50°C
< 1500m
50% at 40°C - 90% at 20°C
Height Weight
140 mm 10 kg
Height Weight
330 mm 25 kg