ATH-Heinl Four Lift 64AP Bedienungsanleitung Seite 104

3 OPERATION
3.1 Operating instructions
Company:
Activity:
Dangers to people and the environment
Danger due to possible slipping of the vehicle
Danger from hot surfaces on the vehicle
Danger of crushing due to moving parts
Electrical hazards due to the electrical equipment
Danger due to the lack of maintenance of the equipment
Protective measures and rules of conduct
Lifting the vehicle
Position the vehicle on the lifting platform
Avoid uneven load distribution, do not overload the platform, use suitable pick-up elements with a non-slip or form-fit
surface, only pick up at specified points on the vehicle.
Check the function of the roll-off safety devices or the swivel arm safety devices in all directions.
Only lift if no persons are endangered.
Work on the lifted vehicle
Depending on the work involved, select and wear personal protective equipment (e.g. hot surfaces).
Watch out for hot parts
Dismantling of components can change the load distribution: if necessary, secure vehicle against tipping over
Use only approved assembly supports
Lowering the vehicle
Remove tools and other objects from the danger zone
Lower only if no persons are endangered
Foot deflectors, safety edges or warning sound after intermediate stop prevent foot injuries
The lifting platform may only be operated without supervision by instructed and competent employees from the age of 18.
Behavior in case of malfunctions and in case of danger
Report defects on the machine to the installer or manufacturer
Switch off the machine and secure it against unauthorized restarting.
Damage may only be repaired by qualified personnel
In case of fire, attempt to extinguish the fire
First aid
Inform the first aider (see alarm or emergency plan)
Treat injuries immediately
Make an entry in the first-aid book
In case of serious injuries, make an emergency call
Maintenance
Repairs may only be carried out by authorized and trained personnel.
Disconnect or secure the machine from the power supply during setup, adjustment, maintenance and servicing work.
Clean the lifting platform at the end of work and check the level of the hydraulic system.
Annual check of the lifting platform by an authorized and instructed person.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
104
Operating instructions
For working on vehicle lifting platforms
Release date: 02.06.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
Date:
Signature: